F-Body Related Part Numbers:

(Standard disclaimers apply, please verify all numbers before ordering)

1993-1999 "1LE" Parts (Click here for more info on bushings)

• 1LE Rear Lower Control Arm (GM p/n 10164151) (2 required, arm complete with bushing)
• 1LE Panhard Rod (GM p/n 10262147)  (rod complete with bushing)
• 1LE Front 32 mm Stabilizer Bar (GM p/n 26032907)
• 1LE Stabilizer Bar Endlinks (GM p/n 10221779)
• 1LE Front 32 mm Stabilizer Bar Insulator (GM p/n 10288551)
• 1LE rear bushing, front lower control arm (GM p/n 22156434)  (bushing only)
• 1LE front bushing, front lower control arm (GM p/n 22145392)  (bushing only)
• 1LE Front Left Lower Control Arm (GM p/n 52367658) (arm complete with bushing)
• 1LE Front Right Lower Control Arm (GM p/n 52367659) (arm complete with bushing)
• 1LE Front Left Upper Control Arm (GM p/n 22156461) (arm complete with bushing)
• 1LE Front Right Upper Control Arm (GM p/n 22156462) (arm complete with bushing)
• 1LE Rear 21 mm Stabilizer Bar (GM p/n 10021221)
• 1LE Stabilizer Bar Endlinks (GM p/n 10221779)
• 1LE Rear 21 mm Stabilizer Bar Insulator (GM p/n 10235886)
• 1LE Rear Shock Upper Insulator (GM p/n 22166909)
• 1LE Rear Shock Lower Insulator (GM p/n 10009135)
• 1LE Rear Shock Insulator Retainer (GM p/n 22166910)
• 1LE Transmission Mount (GM p/n 22146231)
• For more info: 1LE.NET  The 1LE Owners Association

Locking gas cap: GM Part # 22616294

Factory Fog light bulb replacements/alternatives: 

• 880 27w "fog"
• 881 27w "fog" 90-deg base
• 885 50w "drive"
• 886 50w "drive" 90-deg base

More on replacement and upgrade bulbs from The Herd (Tri-State Impala SS Enthusiasts group)

C.A.G.S. bypass: 2.2k ohm 1/2 watt resistor.

OEM SS parts (98+ style, from the GM parts counter, no VIN required)

• SS hood GM p/n 12369963
• Inlet grill screen GM p/n 12369964
• Spoiler GM p/n 12369968

Oil filter UPF58-AC-Delco p/n 25322838

Speed Bleeder p/n 3956 for f/r calipers on the LS1 f-body cars.

Aftermarket CD Changer: Alpine 6 disc (CHA series?): use adapter, Alpine part #kce-202b

Thread size for a replacement shifter knob: M16x1.50

Comments, suggestions, corrections?  acarnut @ telus.net

Home